Digital/Analog Communication Lab

“We are OEM and NSIC Approved in more than 300 categories on GEM.This item is available on GEM for purchase pan-India”

Digital/Analog Communication Lab

“We are OEM and NSIC Approved in more than 300 categories on GEM.This item is available on GEM for purchase pan-India”

MOBILE PHONE TRAINER

Real time study and operation of Smart Phone

Supports to 4G VoLTE (Cat 4), 3G (UMTS/HSPA+), 2G (GSM/EDGE) Networks

Touch screen full HD display

Full understanding of 4G Dual SIM VoLTE Smart Phone working principle and signals

Complete block diagram of a 4G Dual SIM VoLTE Smart Phone on-board

Easy identification of different parts and components of the system at a glance

Easy measurement of voltages and observation of waveforms on test points

Soldering free fault creation and troubleshooting

Cellular system:GSM – Band (2 / 3 / 5 / 8);
  WCDMA – Band (1 / 2 / 5 /8);
  4G VoLTE (TDD) – Band (38 / 40 / 41),
  LTE (FDD) – Band (1 / 3 / 5 / 7 / 8 / 20)
Tx/Rx Frequency band:GSM/GPRS/EDGE
  (850, 900, 1800, 1900 MHz)
  UMTS/HSPA+ (850, 900, 1900, 2100 MHz)
  4G VoLTE (B1, 3, 5, 7, 8, 19, 20, 28, 38, 40)
Output power:+5… +33dBm/3.2mW… 2 W
OS & Processor Features  
Operating system:Android
System Architecture:Qualcomm
Processor core:Octa Core
Processor clock speed:1.4 GHz
Display Features  
Display size:5 inch
Resolution:1920 x 1080
Resolution type:Full HD, 441 ppi
Other display features:IPS display, 5 point multi-touch
Memory & Storage Features 
Internal storage:16 GB
RAM:3 GB
Expandable Memory:128 GB
Connectivity Features  
Supported networks:4G VoLTE (Cat 4)
  UMTS/HSPA+
  GSM/EDGE
Internet connectivity:4G, 3G, Wi-Fi, EDGE, GPRS
Pre-installed browser:Android
Micro USB port:Yes
Bluetooth support:Yes
Bluetooth version:BR/EDR+BLE 4.2
Wi-Fi version:802.11 b/g/n
  Dual band (2.4GHz & 5GHz)
Wi-Fi hotspot:Yes
Audio jack:3.5 mm
OTG compatible:Yes
Location services:GPS, A-GPS & GLONASS
Map support:Google Maps
GPS support:Yes
Camera Features    
Primary camera:    13 Megapixel, LED Flash
  PDAF with FHD Video Recording, 1080p HD Video
Video resolution:1920 x 1080
Secondary camera:5 Megapixel, Display Flash
Secondary camera:Fixed Focus
General Information    
Sensors:Accelerometer,
  Gyroscope, Ambient Light,
  Proximity, Gravity, Vibrator.
SIM Support:Smart Dual SIM, Dual stand by
SIM Card type:Micro SIM
Battery type:Li-Polymer 2800mAH
Sound:Speaker and Earphone Jack (3.5mm)
On board sections:     Power   Management   Unit,
  Charging Circuit, Touch Display, Dual SIM Interface,
  User Interface
User interface:     Buzzer, Vibrator, MIC, Speaker, Hands free port and
  display LEDs
Switched fault:25 nos.
Power Supply:100 – 260V AC, 50/60 Hz
Operating condition:0-400C, 85% RH

FIBER OPTICS COMMUNICATION TRAINER

Fiber optic communication trainer

Full Duplex Analog & Digital Trans-receiver with

660nm & 950mm

Noise Generator with variable gain

Four Seven Segment Display BER Counter

Eye Pattern.

Fiber optic communication trainer having following

Specification:

Transmitter: 01 no. Fiber Optic LED

Receiver: 01 no. Fiber Optic Photo detector

Modulation Techniques : 1. AM 2. FM 3. PWM.

Drivers: 01 no. with Analog & Digital modes

PLL Detector: 01 no. Provided.

Comparator: 01 no. provided

Analog Bandwidth: 350 KHz.

Digital Bandwidth: 2.5MHz.

Function Generator : 1 KHz Sine wave (amplitude

adjustable).

1 KHz Square Wave (TTL).

Fiber Optic Cable: 02 nos of different Lengths viz:

  1. 0.5 meter & b. 1 meter (with standard SMA type

connector).

Cable Type: Step indexed multimode PMMA plastic

cable.

Supply: 230V + 10% VAC, 50 Hertz, single

phase.

Accessories Included: Detailed Instruction Manual,

Microphone, Headphone, Set of 8 assorted

multicolored multistoried wires with 4 mm plug

terminations at both ends having different test

points to observe the waveform and measure other

parameters.

ANALOG COMMUNICATION TRAINER

Circuit diagram printed on PCB

On-board Function Generator

On-board Carrier Signal Generator

On-board AM, FM & PM

Test point provided to study the signal at different stages

Function Generator :   On-board function generator

                                                           Frequency : 0 to 10KHz

                                                           Amplitude : 0 to 10V p-p

Carrier Signal Generator :   On-board carrier signal generator

                                                           Frequency : 60KHz

                                                           Amplitude : 0 to 10V p-p

Modulation Techniques :   Amplitude Modulation,

                                                           Frequency Modulation &

                                                           Phase Modulation

Demodulation Techniques :   Amplitude Demodulation,

                                                           Frequency Demodulation &

                                                           Phase Demodulation

Power Supply :   In-built.

Operating Frequency :   230V AC, 50Hz.

Test Points :   Provided to observe the signals at various stage

Housed in :   Enclosed in an attractive ABS plastic cabinet with cover.

Accessories :  Manual, Connecting Patch Chords.

 

 



FIBER OPTICS COMMUNICATION TRAINER

Fiber optic communication trainer

Full Duplex Analog & Digital Trans-receiver with

660nm & 950mm

Noise Generator with variable gain

Four Seven Segment Display BER Counter

Eye Pattern.

Fiber optic communication trainer having following

Specification:

Transmitter: 01 no. Fiber Optic LED

Receiver: 01 no. Fiber Optic Photo detector

Modulation Techniques : 1. AM 2. FM 3. PWM.

Drivers: 01 no. with Analog & Digital modes

PLL Detector: 01 no. Provided.

Comparator: 01 no. provided

Analog Bandwidth: 350 KHz.

Digital Bandwidth: 2.5MHz.

Function Generator : 1 KHz Sine wave (amplitude

adjustable).

1 KHz Square Wave (TTL).

Fiber Optic Cable: 02 nos of different Lengths viz:

  1. 0.5 meter & b. 1 meter (with standard SMA type

connector).

Cable Type: Step indexed multimode PMMA plastic

cable.

Supply: 230V + 10% VAC, 50 Hertz, single

phase.

Accessories Included: Detailed Instruction Manual,

Microphone, Headphone, Set of 8 assorted

multicolored multistoried wires with 4 mm plug

terminations at both ends having different test

points to observe the waveform and measure other

parameters.

DIGITAL COMMUNICATION TRAINER

Circuit diagram printed on PCB

On-board Bit clock generator

On-board Word clock generator

On-board 8-bit data generator

On-board Carrier signal generator

On-board ASK, PSK & FSK

Test point provided to study the signal at different stages

Bit Clock Generator :   Onboard.

Word Clock Generator           :   Onboard of frequency 8 KHz to 12KHz.

Word Length :   8 Bit.

Binary Input :   Through DIP switches.

Carrier Signal Generator :   200KHz to 1MHz.

Data Format :   NRZ & Bi-polar NRZ.

Modulation Techniques :   ASK Modulaiton using Balance Modulator

                                                       :   PSK Modulaiton using Phase Modulator

                                                       :   FSK Modulation using VCO

Demodulation Techniques :   ASK Demodulation using Diode Detector

                                                       :   PSK Demodulation using Phase Detector

                                                       :   FSK Demodulation using Product Dector

Power Supply :   In-built.

Operating Frequency :   230V AC, 50Hz.

Test Points :   Provided to observe the signals at various stage

Housed in :   Enclosed in an attractive ABS plastic cabinet with cover.

Accessories : Manual, Connecting Patch Chords.

PAM PWM PPM TRAINER KIT

SIGNALS :

Internal frequency                         :   250Hz, 500Hz, 1KHz, 2KHz (Sine wave variable)

1KHz & 2KHz (square wave fixed).

Amplitude                                       :   0 to 4V (p-p)

External frequency                        :   Upto 2KHz.

Amplitude                                       :   0 to 4V (p-p).

SAMPLING :

Internal sampling clock                :   4KHz, 8KHz, 16KH, 32KHz and 64KHz

Sample & sample hold techniques

Natural & Flat top sampling.

Duty Cycle                                      :   50% (OPTIONAL)

MODULATION TECHNIQUES :

Pulse amplitude modulation.

Pulse width modulation.

Pulse position modulation.

VOICE COMMUNICATION :

Voice link using PAM, PWM, PPM modulation techniques with Dynamic microphone & Speaker.

LOW PASS FILTER :

4th Order Butter worth filter with cut – off frequency of 3.4KHz.

INTERCONNECTIONS :

Banana sockets & patch chords are provided for connections on board.

TEST POINTS :

All relevant test points brought out for observation. Observations are carried out on a cathode ray oscilloscope (CRO).

POWER SUPPLY :

+5V, +/-12V D C VOLTAGE

Address List