Power System Lab
“We are OEM and NSIC Approved in more than 300 categories on GEM.This item is available on GEM for purchase pan-India”
Power System Lab
“We are OEM and NSIC Approved in more than 300 categories on GEM.This item is available on GEM for purchase pan-India”
Under Voltage Relay –IDMT along with Relay test Kit
Electromechanical type – IDMT Type
With Plug setting & Time setting multiplier
110V , With “NO” & “NC” Contact @5A Ratings
The above relay should be mounted with Powder coated MS Cabinet with stickered front panel
Voltage input (PT Input) terminated by banana connectors for external voltage input
Relay test Kit (Voltage injector kit)
One number of variable AC voltage Source of 0-400VAC
One number of Autotransformer to adjust the voltage output
One number of digital AC Voltmeter (0-300V) to measure the Voltage output
One number of Automatic trip time measurement circuit (ATTM Circuit) for Relay trip time measurement
One number START push button in ATTM Circuit
One number STOP push button in ATTM Circuit
One number Digital stop Clock in ATTM Circuit to measure relay trip time
All should be mounted on a nice cabinet with diagram stickered front panel.
230VAC@50Hz AC Input with power ON/OFF Switch
Earth Fault Relay along with Earth Fault simulator set up (Motor set up)
Type : Single Pole/element E/F Relay
CT Input : 2A
PMS : 50% -200% in steps of 25%
TMS : 1 to 1 in steps of 0.1s
Function : IDMT
Curve : IDMT curve of 3sec as per IEC-255
Features Self powered : Hand reset type-Mechanical Flag Indicator
Earth Fault simulator set up (Motor set up)
One number of 3 phase ac induction motor/0.5hp/3 phase/1440rpm for short circuit /earth fault creation
One number of short circuit resistor to limit short circuit /Earth current
One number of digital AC Ammeter (0-20A) /3.5 digit / MECO Make to measure the earth current input in amp
One number of 0-20A variable ac current source to test the relay
One number of Automatic trip time measurement circuit (ATTM Circuit)
One number START push button in ATTM Circuit
One number STOP push button in ATTM
Circuit
One number LCD – Digital stop Clock in ATTM Circuit to measure relay trip time in S , S/10 , S/100
One number reset switch in front panel to restart the digital stop clock
All should be mounted on a nice cabinet with diagram stickered on front panel.&230VAC@50Hz AC Input with power ON/OFF Switch
Percentage differential relay setup to study the construction of relay and to find the operating characteristics of the relay.
Setup will consist of ABB make percentage differential relay,
Auto transformer 0-270V, 2A, Ammeter (AC, 10A), Rheostat 5A, 45 ohms,
Rheostat 10A, 20Ohms,
Isolation/Protection transformer,
Current transformer, Auxiliary DC supply unit with transformer, and DP MCB.
All the accessories and relays will be fitted on sheet fixed to M.S. Box
Cabinet almirah type suitable for cable mounting with lock and key arrangement.
Address List
- 12, Truck Market, Opp. R.K. Hospital, Near Mother Dairy Red Light , Pandav Nagar, Delhi-110092
-
+91 9899899166
+91 9871600331
+91 9868039427 -
vinyticsindia@gmail.com
www.vinytics.in
